×
Quick Equipment Search
Equipment Fliter












used search tag

5055E UTILITY TRACTOR

Utility Tractor

  • 59 engine hp
  • Best-in-class visibility
  • Thick comfortable seat
  • 5-Year Powertrain Warranty


Apply For Financing
View Product Brochure
https://www.deere.com/assets/publications/index.html?id=38b83aa3


Features



Heavy-duty MFWD front axle with limited slipHeavy-duty MFWD front axle with limited slip
MFWD 55-degree turn angle MFWD 55-degree turn angle
MFWD indicator lightMFWD indicator light

Limited-slip, heavy-duty MFWD front axle will provide operators with increased drawbar pull and improved traction when operating in slippery conditions. This ensures the operator gets the required torque to the ground for applications that demand more from the tractor. The MFWD front axle also reduces wheel slippage with less tractor ballasting for reduced soil compaction, increased fuel economy, and longer tire life.

The MFWD centerline design provides excellent maneuverability around the worksite and more crop clearance so producers aren't driving down their crop or profits. Additional versatility is proven when wheel treads are adjusted with 6 degrees of caster angle and a 55-degree turn angle, which results in a turning radius as short as 3 m (9.9 ft) (brakes applied), allowing plenty of horsepower to turn around in tight places. 10 degrees of axle oscillation follows uneven terrain, allowing for consistent performance and comfortable ride.

Axle oscillation also reduces the stress and maintenance cost on the axle spindles because loads are consistently spread across the entire axle. The centerline design eliminates the need for drive shaft universal joints that require regular maintenance. Anti-wrap shielding on the driveline is standard to prevent crop material and debris from building around the driveline and ensures tractor performance. Three grease points are conveniently located to minimize maintenance time while maximizing front axle performance.

NOTE: The MFWD engagement lever is located on the left-hand side of the operator's seat. For the operator’s convenience, when MFWD is engaged, an indicator light will appear on the dash.

Adding ease to operation
Enhanced operator controlsEnhanced operator controls

Operator comfort is important regardless of the application. Improving the 5E 3-Cylinder Tractor models, the hand throttle has been relocated to the right-hand console. This is 30.5 cm (12-in.) closer to the operator and within easy reach versus the previous location on the center-hand console. Operators may also notice the additional legroom provided by the repositioned loader controls, providing a more enjoyable experience.

Nine forward and three reverse speeds with in-line synchronized shuttle shifting

The SyncShuttle transmission is designed to match the excellent power and torque characteristics of the John Deere PowerTech™ engines. Transmission durability is enhanced with the pressure-lubricated top shaft, allowing an operator to achieve performance from one working season to the next. Additionally, this in-base transmission is configured with fixed draft links, single-speed power take-off (PTO) and mechanical PTO engagement.

 

The transmission is characterized as full top shaft synchronized (TSS) when forward shifting on-the-go between speeds, and is characterized a synchronized while depressing the clutch.

 

2100 engine rpm
  16.9-28
 Tire0.671 RR
GearRear Wheel SpeedGround Speed
 rpmkmph
A19.12.3
A212.43.1
A317.04.3
A Rev-13.5-3.4
B123.15.8
B231.47.9
B343.210.9
B Rev-34.2-8.6
C158.914.9
C280.320.3
C3110.327.9
C Rev-87.3-22.1

 

Creeper available for R2 and R4 as field installed kit with following speeds in kmph.

Creeper 10.40
Creeper 20.54
Creeper 30.75
Creeper Rev-0.59
Easy and comfortable shifting
Operator-friendly transmission controls with hand throttleOperator-friendly transmission controls with hand throttle
Synchronized shifting in all forward and reverse gearsSynchronized shifting in all forward and reverse gears
Range selection patternRange selection pattern

Nine forward and three reverse (9F/3R) speeds are achieved by using two platform-mounted levers for shift operation. The gear lever at the operator's right hand selects one of three forward gears and one reverse gear, as well as the integrated park position. The range lever at the operator's left hand selects collar-shift A, B, and C ranges.

Operators can easily switch directions without having to completely stop the tractor with synchronized, in-line, shuttle-shift capability between forward and reverse gears on the gear-shift lever in all three ranges (A, B, and C ranges).

A neutral start switch requires the gear-shift lever be in the neutral or park positions to start the engine.

A positive park pawl on the transmission provides positive park and eliminates the need for a hand brake. This also eliminates clutch service costs that occur when the park brake is accidentally left engaged.

Electrohydraulic reverser lever Electrohydraulic reverser lever

The John Deere-built PowrReverser transmission provides 12 forward and 12 reverse gears for operators requiring additional flexibility for multiple applications. It comes standard with shiftable 540/540 Economy power take-off (PTO) and electronically activated, telescoping draft links. This transmission is ideal for operators using their tractors to perform in versatile applications.

 

Hydraulic wet forward and reverse clutches maximize durability and will outlast the life of any dry clutch. When tractors are run by multiple operators with a variety of experience levels, a wet clutch is the best way to maintain transmission integrity and performance while decreasing clutch replacement costs.

 

The gear lever selects one of four speeds, all synchronized shifts for on-the-go shifting with the use of the clutch. The range lever selects collar-shift A, B, and C ranges, which are not synchronized.

 

Maximum productivity is achieved with hydraulic PowerShift between forward and reverse and is ideal for loader and rear-blade applications that require frequent directional switches in tight spaces. Excellent modulation allows the operator to shift the direction lever from neutral to forward or reverse, forward to reverse, reverse to forward, or to neutral from forward or reverse.

 

Operators can accomplish all these directional changes without sacrificing comfort or having to depress the clutch pedal. The speed of directional changes can be adjusted to the operator's preference or application demands with the field-installed infinitely-variable control kit.

 

The PowrReverser transmission also allows the operator to steer and shift direction with the left hand, freeing the right hand to operate other tractor controls, such as the loader, rear implements, or hand throttle.

5075E5075E

Constant-mesh, helical-cut gears provide quieter operation and excellent reliability while the pressure-lubricated top shaft adds to the transmission durability. Fully enclosed, rigid shift linkages for short throw and crisp shifts enable all operators to clearly know in what range and gear they are operating.

 

Positive park pawl on the transmission provides positive park and eliminates the need for a hand brake.

 

This also eliminates clutch service costs that occur when the park brake is accidentally left engaged. A neutral start switch requires the directional lever to be in the neutral position to start the engine.

 

Availability for 3-cylinder 5E Tractors:

Model

12F/12R
Transmission

5045E (two-wheel drive [2WD])

 

5045E (mechanical front-wheel drive [MFWD])

 

5055E (2WD)

   

5055E (MFWD)

X

5065E (2WD)

 

5065E (MFWD)

X

5075E (2WD)

 

5075E (MFWD)

X

X = Available 

A smaller, more efficient after-treatment device provides more space under the hoodA smaller, more efficient after-treatment device provides more space under the hood

The 5045E, 5055E, 5065E, and 5075E Utility Tractors meet U.S. Environmental Protection Agency (EPA) Final Tier 4 (FT4) exhaust emissions regulations with a diesel oxidation catalyst (DOC)/diesel particulate filter (DPF) system. Modifying the after-treatment device resulted in better forward and side visibility around the hood. The hood slope of the updated design is comparable to the Tier 2 tractors previously produced. Similar to the system on the 5M, the purpose of the DOC/DPF combination is to reduce toxic gases emitted from the exhaust, as well as to filter particulate matter to prevent it from becoming airborne.

 

As the tractor continues to operate over time, as is the case with any filter, the DPF will accumulate particulate matter and will need to be cleaned. It is cleaned through a process called regeneration. During a regeneration cycle, exhaust temperatures increase to burn off the excess particulate matter. On a John Deere 5 Series Tractor equipped with a DOC/DPF, the operator does not need to provide any input to trigger the regeneration process.

Exhaust filter cleaning switchExhaust filter cleaning switch

On the dash is an exhaust filter cleaning switch. As long as this switch remains in the auto position, the tractor is in full control of the regeneration process and will regenerate on an as-needed basis during operation. The operator just continues to operate the tractor as normal while the regeneration process takes place.

 

There may be times a tractor is operating in an environment not suitable for a regeneration cycle, such as in a confined area or during service. For this reason, the bottom section of the exhaust filter cleaning switch can be depressed to disable the regeneration. The disable position allows the operator to temporarily inhibit the regeneration cycle. The operator should return the switch to auto mode as soon as possible to avoid continued soot buildup in the exhaust filter, which can lead to a parked regeneration. John Deere does not recommend disabling the automatic exhaust filter cleaning unless it is absolutely necessary.

 

The simplicity and intuitiveness of the exhaust filter cleaning switch maximizes uptime by minimizing the operator’s input into the regeneration process. This increases the overall productivity of the tractor by reducing the chances of a parked regeneration. The operator-friendly interface allows the operator to easily complete the task at hand, even during the regeneration process.

Shiftable 540/540 economy PTO (5E) for cab tractorsShiftable 540/540 economy PTO (5E) for cab tractors
Shiftable 540/540 economy PTO (5E) for open operator station (OOS) tractorsShiftable 540/540 economy PTO (5E) for open operator station (OOS) tractors

The 540 economy PTO option comes in base equipment with the 12F/12R PowrReverser™ transmission.

 

The 540/540 economy PTO allows operators to select the engine rpm for reduced fuel consumption, reduced noise levels, reduced vibration, and less wear and tear on the engine, while at the same time keeping the proper 540 rpm at the PTO.

 

The economy PTO provides 540 rpm to the PTO at 1600 engine rpm. The 540 economy mode is ideal for any PTO application, from running a mower-conditioner to a baler or a cutter, where full engine horsepower is not required.

 

Operating at lower engine rpm decreases fuel costs up to 30 percent and provides additional productivity by improving the operating experience through enhanced operator comfort from reduced noise and vibration.

 

A lever allows the operator to simply change between 540 and 540E when conditions merit the opportunity to save fuel without affecting performance.

 

For heavy-duty operations requiring maximum PTO power, the PTO shift lever is placed in the 540 position, the PTO is engaged, and the engine is run at a rated speed of 2100 rpm. This selection gives 540 rpm to the PTO shaft and delivers the fully advertised horsepower at rated engine speed.

 

When the cab tractor is in economy PTO mode, the engine is electronically limited to 1600 rpm, preventing accidental over speeding of PTO implements and protecting against binding the PTO shaft.

 

This interlock also prevents accidental shifting of the PTO selector lever at engine speeds above 1600 rpm, which would lead to downtime for fixing implements or drivetrain components.

Specifications


Compare the specifications of up to 4 models

Key Specs 5055e-utility-tractor
Current Model
Engine descriptionJohn Deere PowerTech 3029
Engine displacement3 cylinders: 2.9 L
179 cu in.
Rated engine powerAt 2100 rpm: 43.9 kW
59 hp
Rated PTO power (hp SAE)At 2100 rpm: 30.5 kW
41 PTO hp
Maximum PTO power
Transmission typeStandard: 9F/3R SyncShuttle
Optional: 12F/12R PowrReverser
Hydraulic pump rated outputStandard: 68.6 L/min
18.2 gpm
Rear hitch category (SAE designation)Category 2; convertible to 1
Base machine weight
Maximum engine power
Engine specifications
DescriptionJohn Deere PowerTech 3029
Engine type
Engine family
Rated speed
AspirationTurbocharged
Cylinders linersWet sleeved
Emission level
After treatment type
Displacement3 cylinders: 2.9 L
179 cu in.
Engine performance
Rated powerAt 2100 rpm: 43.9 kW
59 hp
Rated PTO power (hp SAE)At 2100 rpm: 30.5 kW
41 PTO hp
Maximum PTO power
Power boost
Engine peak torque
PTO torque rise
Intelligent Power Management (available in transport and/or mobile PTO applications)
Maximum engine power
Transmission
TypeStandard: 9F/3R SyncShuttle
Optional: 12F/12R PowrReverser
ReverserOptional
Clutch; wet/dryDry on 9F/3R SyncShuttle
Wet on 12F/12R PowrReverser
CreeperOptiona on 9F/3R Transmission models
Hydraulic system
TypeOpen Center
Pump rated outputStandard: 68.6 L/min
18.2 gpm
Available flow at a single rear SCV43.1 L/min
11.4 gpm
Available flow at front SCVs
Number of rear selective control valves (SCVs)
Number of mid selective control valves (SCVs)
Number of front selective control valves (SCVs)
Joystick SCV control2WD: FIK
MFWD: Standard
SCV control
Rear hitch
Hitch draft control load sense typeMechanical
Remote control valves availableStandard: 1
Optional: 2
Hitch category (SAE designation)Category 2; convertible to 1
Maximum lift capacity behind lift points
Sensing typeTop link
Rear axle differential lock
Lift capacity at standard frame
Drawbar
Drawbar category
Maximum vertical load
Rear power take-off (PTO)
TypeStandard: Independent 540
Optional: Independent 540E (12x12)
Engine rpm (at rated PTO speeds)540 at 2100 rpm
PTO actuationMechanical (lever on 9x3)
Electrohydraulic with wet clutch (12x12)
Ground speed PTO option availability
Multispeed PTO option availability
Front hitch
Category
Electric power
Standard lift capacity
Front power take-off (PTO)
PTO speed
Rear axle
Type
Final drive typePlanetary
Differential controlsMechanical (pedal)
Axle typeFlanged
Brakes, type and controlHydraulic wet disc
Rear differential lock
Load rating
Front axle
Type
Front axle differential lock
Load rating
Tires
Front2WD: 7.5-16 R1
MFWD: 9.5-24 R1
Rear2WD: 13.6-28 R1
MFWD: 14.9-28 R1
Wheel tread range
Turning radius with brakes2WD: 3.1 m
10.1 ft
Turning radius without brakes2WD: 3.5 m
11.6 ft
Steering
Electrical system
Alternator size
Battery options
Total cold cranking amps
Type of bulb in beacon (Halogen, Zenon, LED)
Type of bulb in headlight (Halogen, Zenon, LED)
Working lights
dB(A) rating for backup alarm
Operator station
Rollover protective structure, OOSRigid - foldable - telescopic
Foldable, 2-post
Platform - flat/straddle
Straddle
Gearshift location - console/floor
Floor, on the side
Seat
Cab suspension
Instructional seat
Display
Radio
Inner cab volume
dB(A) rating
Cab glass area
Front visibility
Safety glass rating
Dimensions
Wheelbase2WD and MFWD: 2050 mm
80.7 in.
Overall length
Drawbar clearance
Front axle center
Approximate shipping weight, Open;CabMFWD: Open: 2500 kg
5511 lb
Cab: 3200 kg
7054 lb
Overall height
Weight
Base machine weight

Maximum ballast level
Maximum permissible weight
Capacities
Crankcase oil volume
Fuel tankStandard: Open: 68 L
18 U.S. gal.
Cab: 82 L
21 U.S. gal.
Diesel exhaust fluid (DEF) tank
Cooling system
Transmission-hydraulic system
Serviceability
Interval for engine oil change
Interval for hydraulic/transmission oil change
Interval for engine coolant change
Loaders
Loader
Lift capacity at full height
Maximum lift height
Precision AG
Guidance
Telematic
Remote diagnostics
Miscellaneous
Country of manufacturePune, India
Side slope rating
Uphill/downhill slope rating
Tracks
Drive type
Midrollers
Track width
Tread spacing

Reviews

5

5 reviews

Rating Snapshot

5
0
0
0
0
5
5
5

More tractor than I anticipated

5/5

Have hill farm in Northern Ky. Have livestock and use for bush hog and hay work. Tractor handles disc mower much better than I anticipated. Heck of a tractor for the money and very fuel efficient. Dealer was spectacular. Thank you John Deere

Pros

Cons

Eagle

From: Northern Ky

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Really Value for Money

5/5

I recommend this to my friends and family its really good product from John Deere.

Pros

Cons

vaishnav

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

5
2
5

Excellent Tractor

5/5

The 5055E was bought new and has been owned for a few months. So far, the tractor has more than exceeded my expectations. It is used for bush-hogging (5-footer), Plowing (20-disk large harrow) and various other farm requirements. This tractor more than holds its own and above all, the ease of use is outstanding.

Pros

  • noise level quick starts pricing and torque powe

Cons

Bulldog

From: Newberry, SC

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

I can't be any happier

5/5

This tractor has everything you could ask for the diesel motor purrs and uses no fuel hardly. And the loader is the best on this also lots of power and tractor is just the best thing you are gonna buy for the money. Agrivision was the greatest to work with also. Bailey is a good sales lady.

Pros

  • fuel consumption
  • power
  • comfortable to ride on
  • motor just purrs
  • easy to use
  • agrivision was good to work with
  • price

Cons

  • nothing bad from me

Jamesdean77

From: Van Wert, IA 50262, USA

Length of Ownership: 1week

Usage Frequency: Daily

Level of Expertise: Beginner

5
2
5

Handy tractor for small beef cattle operation

5/5

I use this tractor for tedding, raking, moving hay wagons and loading cattle manure and poultry litter. Also use this tractor to run small square hay baler. Very pleased so far. No problems.

Pros

Cons

stump

From: Virginia, USA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5